Monday, April 5, 2010

0x80070032 Error on OSD

I'm doing OSD via boot from media, and 0x80070032 error pops up after downloaded Windows PE. After some troubleshooting, I found out that the "Copying Winodws PE" step is finished faster than normal (no download at all). Therefore I decided to wipe out everything inside the harddisk by doing normal installation with CD. I force shut down the machine after the format step finished (without OS installation). Then I redo the OSD via boot from media and it's works! Cheers :)
By at
Labels: , ,

4 comments:

  1. Craig O'NeillSeptember 1, 2010 at 11:08 PM

    If you enable F8 on your boot disk, you just need to bring up the cmd console and do the following:

    1. Diskpart
    2. Select Disk 0
    3. Clean

    Restart

    ReplyDelete
  2. HauSeptember 18, 2010 at 12:00 PM

    Hey Craig, thanks for your advice, I will try it out if I face this issue again. :)

    ReplyDelete
  3. JeffMarch 7, 2011 at 9:59 PM

    Hi Craig, I received this same issue and your suggestion worked like a charm. Thanks!

    ReplyDelete
  4. AnonymousFebruary 12, 2013 at 8:16 PM

    I love you Craig O'Neill!!! )))

    ReplyDelete

Subscribe to: Post Comments (Atom)